Previous
Next


Max White

ARYANN PAINTS MAX Exterior Acrylic Latex to deliver outstanding performance and protect against the elements. Cold and frosty or hot and humid, this formula goes on smooth and resists fading and peeling. And thanks to its advanced acrylic resin technology, you’ll enjoy outstanding adhesion and color retention. MAX offers satisfaction guarantees of beautiful protection. This superior quality formula protects masonry, stucco, brick and concrete block against chalking, alkali and efflorescence. Plus it gives a mildew resistant coating and protects against harsh weather. This beautiful low sheen provides a sleek, smooth, uniform attractive finish with spray, brush or roller application and can be applied to a variety of exterior surfaces, MAX offer great hide and coverage that beautifies your home.

Inquire Now

  • Applications

  • Directions For Use

  • Coverage

  • Shelf Life & Storage Instructions

ARYANN PAINTS MAX White is properly prepared for exterior bare or previously painted masonry, hardboard, brick, stucco and cement composition panels. Not for use on floors.

Stir thoroughly before using  and occasionally when in use. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. If applying by spray, back-roll or back-brush to work product into the surface. Apply a liberal coat of product uniformly, working well into the surface. Do not apply when temperature is below 10 ℃ or more than 40 ℃. Avoid painting late in the day when dew and condensation are likely to form or if rain or snow is expected. Provide a good ventilation and warmth for normal drying.

On well dried, cleaned, puttied and primed surface, apply 2/3 coats of Aryann Paints MAX thinned with 200 ml of clean potable water for one liter of paint & Mix well. Do not overthin. Apply the first finishing coat with brush or roller. Allow it dry for at least 6-8 hours or overnight depending on ambient temperature, humidity and surface conditions. Apply the second coat only when the first coat is dry. Leave a gap of 6-8 hours between coats.

Approximately 75 – 90 sq. ft. per liter. on smooth, nonporous surfaces. Coverage figures do not include loss due to surface irregularities and porosity or material loss due to application method or mixing. It depends on many factors like surface conditions, surface preparation, application skill, weather conditions, dilution, etc. The coverage mentioned is under ideal conditions and will vary depending on site conditions for best hiding, tint primers toward finish coat color. Some colors, drastic color changes, or porous surfaces may require additional coats to achieve a uniform finish.

Why You Will Love It

  • Dries quickly
  • Stain resistant
  • Superior adhesion
  • Mildew resistant finish
  • Superior flow & leveling
  • Good hide and coverage
  • Soap and water cleanup
  • Good all-weather durability
  • Provides a flexible, high-build film
  • Application with spray, brush and roller
  • Great wet adhesion and dirt pick-up resistance
  • High quality paint specially formulated to meet the needs of professional painter